Lock

- UL-listed 437

- 8 levers, steel (electrolyte zinc-plated)

- Lock case: Diecasting

- Bolt: Diecasting

- Key not withdrawable when lock is unlocked

- Prepared for microswitch

- Suitable for "right hand" doors

- Weight: Approx. 335g

Keys

- 2 Double-bit keys, diecasting, nickel plated, 90mm

- Weight: Approx. 40g

Type as 71111, but not VdS-listed, so we allowed to deliver

- Key with stamped code

- Locks with the same code

- Key withdrawable when lock is unlocked
(not suitable for walk-in doors)

Options

- Suitable for "left hand" doors

- Microswitch for bolt monitoring

- Bolt with 2 tap holes M4, distance 15mm

- Bolt extension, 13 x 3,5 mm, steel surface treated

- Key pin 9 mm above cover plate

- Lock case and bolt surface treated

- 4 inch screws 29mm, 4 securing rings

- Mounting plate: 2 mm thick, loose or mounted, with   4 tapped bushes, screws and rings

- Manganese steel plate: 1,5 mm thick, as drilling   protection, loose or spot welded below the mounting   plate.

- Keys: Brass 90/120/145/160 mm
  Diecasting 65/90/120 mm
  Key for lengthening up to 360mm, with foldable or   detachable mechanism