UL-listed 437
8 levers, steel (electrolyte zinc-plated)
Lock case: Diecasting
Bolt: Diecasting
Key not withdrawable when lock is unlocked
Prepared for microswitch
Suitable for "right hand" doors
Weight: Approx. 335g

2 Double-bit keys, diecasting, nickel plated, 90mm
Weight: Approx. 40g

Type as 71111, but not VdS-listed, so we allowed to deliver
Key with stamped code
Locks with the same code
Key withdrawable when lock is unlocked(not suitable for walk-in doors)

Suitable for "left hand" doors
Microswitch for bolt monitoring
Bolt with 2 tap holes M4, distance 15mm
Bolt extension, 13 x 3,5 mm, steel surface treated
Key pin 9 mm above cover plate
Lock case and bolt surface treated
4 inch screws 29mm, 4 securing rings
Mounting plate: 2 mm thick, loose or mounted, with 4 tapped bushes, screws and rings
Manganese steel plate: 1,5 mm thick, as drilling protection, loose or spot welded below the mounting plate.
Keys: Brass 90/120/145/160 mm
Diecasting 65/90/120 mm
Key for lengthening up to 360mm, with foldable or detachable mechanism

Standard mounting dimensions
Suitable for installation in Mauer-boltworks