Lock

- Changeable locking mechanism, changeable with pin at the back of the lock

- 11 levers, steel (electrolyte zinc-plated)

- Lock case: Diecasting

- Bolt: Diecasting

- Bolt with 2 tap holes M4, distance 15mm

- Key not withdrawable when lock is unlocked

- Prepared for microswitch

- Suitable for "right hand" doors

- Weight: Approx. 510g

Keys

- Double-bit key, high-strength brass, nickel-plated 150mm (to be ordered separately)

- Weight: Approx. 45g / key

Type as 70076, but changeable with change key in the keyhole (inclusive of change key)

Options

- Suitable for "left hand" doors

- Microswitch for bolt monitoring

- Lock case and bolt surface treated

- Bolt extensions, 30 mm wide, straight ,to the front and/or to the back

- 4 inch screws 36 mm, 4 securing rings

- Mounting plate: 2mm thick, loose or mounted, with 4 tapped bushes, screws and rings

- Manganese steel plate: 1,5 mm thick, as drilling protection, loose or spot welded below the mounting plate

- Factory key

- Change key

- Key for lengthening up to 360 mm, with foldable or detachable mechanism

- Double-bit parts, high-strength brass, nickel-plated, 63 mm, suitable for key carrier bar 86124

- Leather bag for the bit parts