Lock

- Changeable locking mechanism, changeable with pin at the back of the lock

- 8 levers, steel (electrolyte zinc-plated)

- Lock case: Diecasting

- Bolt: Diecasting

- Key not withdrawable when lock is unlocked

- Prepared for microswitch

- Suitable for "right hand" doors

- Weight: Approx. 440g

Keys

- Double-bit key, diecasting, nickel-plated, 90 mm (to be ordered separately)

- Weight: Approx. 20 g

Type as 70091, but changeable with change key in the keyhole including 1 change key, brass, nickel-plated, 90 mm

Type as 70091, but changeable without further means, key withdrawable when lock is unlocked, not Vds-listed (not suitable for walk-in doors)

Options

- Suitable for "left hand" doors

- Microswitch for bolt monitoring

- Bolt with 2 tap holes M4, distance 15 mm

- Key pin 9 mm above cover plate

- Lock case and bolt surface surface treated

- 4 inch screws 32 mm, 4 securing rings

- Mounting plate: 2 mm thick, loose or mounted, with 4 tapped bushes, screws and rings

- Manganese steel plate: 1 ,5 mm thick, as drilling protection, loose or spot welded below the mounting plate

- Factory key

- Keys:

Brass 70 / 90 / 132 / 150 mm

Diecasting 90mm

Key for lengthening up to 360 mm, with foldable or detachable mechanism