Changeable locking mechanism, changeable with pin at the back of the lock
8 levers, steel (electrolyte zinc-plated)
Lock case: Diecasting
Bolt: Diecasting
Key not withdrawable when lock is unlocked
Prepared for microswitch
Suitable for "right hand" doors
Weight: Approx. 440g

Double-bit key, nickel-plated 90mm (to be ordered separately)
Weight: Approx. 20g

Suitable for "left hand" doors
Microswitch for bolt monitoring
Bolt with 2 tap holes M4, distance 15 mm
Key pin 9 mm above cover plate
Lock case and bolt surface surface treated
4 inch screws 32 mm, 4 securing rings
Mounting plate: 2 mm thick, loose or mounted, with 4 tapped bushes, screws and rings
Manganese steel plate: 1 ,5 mm thick, as drilling protection, loose or spot welded below the mounting plate
Factory key
Keys:
Brass 70 / 90 / 132 / 150 mm
Diecasting 90mm
Key for lengthening up to 360 mm, with foldable or detachable mechanism

Standard mounting dimensions
Suitable for installation in Mauer-boltworks
Please inform us about the desired locking (factory locking or the locking adjusted to the delivered keys)