Lock

- 8 levers, steel (electrolyte zinc-plated)

- Lock case: steel (electrolyte zinc-plated)

- Flat bolt: steel (electrolyte zinc-plated), straight

- Bolt way 12 mm

- Bascule

- Mounting plate: 2 mm thick, mounted, steel (electrolyte zinc-plated)

- Key not withdrawable when lock is unlocked

- Suitable for "right hand" doors

- Weight: Approx. 535g

Keys

- 2 Double-bit keys, diecasting, nickel-plated, 65 mm

- Weight: Approx. 35 g

Options

- Suitable for "left hand" doors

- Mounting plate : 2 mm thick, loose or mounted, with 4 tapped bushes, screws and rings, falling out protection of the levers

- Manganese steel plate:

1,5 mm thick, as drilling protection, loose or spot welded below the mounting plate

- Angle with / without nickel-plated bolts, Ø 20 oder Ø 25 mm

- Angle mounted with screws or riveted

- Riveted bolt extension 45 x 3 x 52 mm (interchangeable with 74036)

- Bascule 142 mm in locked position

- Cap split pins 10328 (Ø 8 x 13 mm), loose, for fixing of bascule extensions

- Bolt 16 mm reduced (suitable for locking in 2 directions)

- Keys:

Brass: 70 / 90 / 120 mm

Diecasting: 65 / 90 mm

If security risk is acceptable:

- Locking over passepartout (not Vds-listed)